Earth Support Corp

Bennington CountyVermont

Arlington, Vermont

Bedrock sits a median 42 ft down across 463 logs, deeper than the Vermont median of 20 ft. 1 of its 14 inventoried bridges is rated poor (7%, against 4% statewide).

Median depth to bedrock

42 ft

middle half 22–78 ft · 463 logs

Bridges rated poor

1

of 14 inventoried · 1 closed

Mapped landslides

1

USGS inventory points

FEMA repair $, Bennington County

$9.4M

federal share since 2010 · county-wide

01 · Ground

Rock turns up a median 42 ft down

From 463 depth-to-rock records inside Arlington (Vermont DEC well records). Logs cluster where people drill wells and bore for roads, so treat this as the town’s pattern, not a site answer.

Half of Arlington's logs reach rock between 22 and 78 ft

Depth to bedrock: 10th–90th percentile whisker, middle-half box, median tick; dashed line = Vermont median.
median 42 ft
VT 20 ft
050100 ft
0501001502000–5 ft5–10 ft10–20 ft20–50 ft50–100 ft100+ ft
n = 463 logsSource: Vermont DEC well records
▸ Show the numbers
Depth to rock (ft)Logs
0–511
5–1025
10–2061
20–50160
50–100127
100+79

Rock within 10 ft

10%

of logs (34% across Vermont). Shallow rock means ledge in excavations, refusal for driven piles and rock anchors rather than soil nails; deep ground means taller shoring and more groundwater. 42% of logs here go past 50 ft.

Mapped landslides

1

1 landslide. Inventory points from the USGS U.S. Landslide Inventory; many are prehistoric slides mapped from lidar.

02 · Bridges

1 of 14 bridges are rated poor — above the Vermont rate of 4%

Every highway bridge and large culvert in the 2025 National Bridge Inventory that stands inside Arlington. Median age 56 years; 1 posted for weight; 1 closed.

43% good, 7% poor

FHWA good / fair / poor rating — the lowest of deck, superstructure, substructure or culvert.
  • Good6 · 43%
  • Fair7 · 50%
  • Poor1 · 7%
n = 14 structuresSource: FHWA National Bridge Inventory 2025
▸ Show the numbers
BuiltStructures
pre-19101
1920s2
1930s2
1940s1
1960s1
1970s2
1980s4
1990s1

The poor-rated bridges

Bridges rated poor in Arlington
CarriesOverBuiltDaily traffic
C3022closedBATTEN KILL RIVER1943230
Every poor bridge in New England

03 · Dams & disasters

Bennington County has drawn $9.4M in federal disaster repair since 2010

FEMA Public Assistance is reported by county, so the figure below is Bennington County-wide context, not a Arlington number.

FEMA Public Assistance, Bennington County

$9.4M

Federal share obligated across 205 projects in 6 declared disasters since 2010. The largest category is roads & bridges (45%); roads & bridges took $4.2M.
Dams, disasters & moving ground

04 · Money & permits

1 ground-related permits in the city's open data

Ground-related permits in open data

1

Permits in the city’s open-data portal that mention retaining walls, excavation or foundations. Only a handful of portals are read, so this counts what is published, not everything built.

05 · Next door

Arlington and the 5 towns that border it

A dash means no data for that layer, not zero.
Arlington compared with neighbouring towns
TownPoor bridgesRock depth
Arlington, VT1 / 1442 ft
Manchester, VT0 / 2230 ft
Sunderland, VT0 / 1656 ft
Shaftsbury, VT0 / 950 ft
Sandgate, VT0 / 728 ft
Glastenbury, VT0 / 5

Where these numbers come from

Method, sources & caveats

Arlington is the Census county subdivision 5000301450 (Bennington County). Every record is placed here by its coordinates, not by the place name the source uses.

  • Towns are Census county subdivisions: cities, towns, plantations, and Maine/New Hampshire unorganized territories and townships. Every record is placed in a town by its coordinates (point-in-polygon), not by the source's own place label — so a bridge in Roxbury counts for Boston and a well in 'North Waltham' counts for Waltham.
  • Bridges: FHWA NBI 2025, highway structures ≥ 20 ft including large culverts. 'Poor' is FHWA's good/fair/poor rating (lowest of deck, superstructure, substructure or culvert ≤ 4). Percent-poor is shown only for towns with at least 5 structures.
  • Depth to bedrock is the median of driller- and boring-reported depths in the town, shown only where at least 10 logs exist. Water-well logs over-sample rural lots and hilltops; one town median never describes a particular site.
  • Bedrock depths use the same state databases and filters as the Bedrock & soils module (bedrock wells and borings that reached rock, 0 < depth ≤ 400 ft, exact re-filings dropped), but every log is placed in a town by its coordinates rather than the driller's town field, so town counts can differ slightly between the two pages. Connecticut and Rhode Island have no statewide public well-log database with depths.
  • Dams: only high-hazard-potential dams whose latest condition assessment is Poor or Unsatisfactory are counted (live NID). Connecticut and Rhode Island assessments may lag.
  • FEMA Public Assistance dollars are federal share obligated for disasters declared since 2010, reported by county — they are county context, not a town figure.
  • Grant awards are Massachusetts only (EEA Dam & Seawall program, MVP Action grants, CZM Coastal Resilience). Other states' programs are not yet included.
  • Ground-related permit counts cover only the municipal portals the pipeline reads (Boston, Cambridge, Somerville, Worcester, Framingham, Providence, Portsmouth, Hartford and a few others) — an absent count means 'not covered', not zero.
Data as of
Sep 11, 2026
Generated
Sep 11, 2026
Records
367,748
Refresh
Live pull · weekly

Published by Earth Support Corp as a public resource. Regional statistics for planning and curiosity. They are not an engineering report, a bid recommendation or a statement about any particular site, firm or project. Spot an error? Tell us and we will correct it. Full method: methodology.

CallStart Quote