Get Your 3-Day Quote

Shoring & Earth SupportSoldier piles and lagging, sheet piles, tiebacks and bracing: the SOE sub scope, sized for tight Boston lots.AnchorsSoil and rock anchors — ground, helical, and micropiles — to reinforce foundations.Underpinning & Basement LoweringPit-and-pour underpinning for builders and GCs lowering basements, with micropiles where pits can't reach.Pile DrivingDriven foundation piles installed to capacity with production-rate efficiency.Drilled ShaftsAugered, cased, and rock-socketed drilled shafts for high-capacity foundations.Soil NailingFully grouted soil nails installed top-down to reinforce a cut in place, lift by lift.Limited-Access & Low-Headroom DrillingCompact limited-access drills for anchors, micropiles, and tiebacks under restricted headroom and tight access.Sheet Pile Walls & CofferdamsVibratory-driven and extracted sheet pile walls, cofferdams, and bulkheads for work below the water table.Micropiles & Pin PilesSmall-diameter, high-capacity drilled and grouted piles socketed into glacial till or bedrock.Pre-construction Ground ChecksRock probes, a logged test shaft and proof tests before you design or bid — factual field logs plus our installed-cost range.Ground ScreeningA desk screen of 5–500 sites: nearest measured logs, rock-depth range and a foundation-risk tier for each.

Project location

Boston-area site — neighborhood, address, or job name.

Timeline

Desired outcome (optional)

What does success look like? e.g. shore a 24-ft excavation, protect the neighboring building, keep the dig on the critical path.

Adjacency to existing structuresWork is adjacent to existing buildings or structuresTight-tolerance shoring, vibration, or settlement risk near neighbors.

Soil / dewatering notes (optional)

Known soil conditions, groundwater, fill, obstructions, or a boring log if you have one.

Prefer to talk it through?+1 978 846 6851

What do you need?